The web based syslog https://lggr.io
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Doxyfile 105KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805180618071808180918101811181218131814181518161817181818191820182118221823182418251826182718281829183018311832183318341835183618371838183918401841184218431844184518461847184818491850185118521853185418551856185718581859186018611862186318641865186618671868186918701871187218731874187518761877187818791880188118821883188418851886188718881889189018911892189318941895189618971898189919001901190219031904190519061907190819091910191119121913191419151916191719181919192019211922192319241925192619271928192919301931193219331934193519361937193819391940194119421943194419451946194719481949195019511952195319541955195619571958195919601961196219631964196519661967196819691970197119721973197419751976197719781979198019811982198319841985198619871988198919901991199219931994199519961997199819992000200120022003200420052006200720082009201020112012201320142015201620172018201920202021202220232024202520262027202820292030203120322033203420352036203720382039204020412042204320442045204620472048204920502051205220532054205520562057205820592060206120622063206420652066206720682069207020712072207320742075207620772078207920802081208220832084208520862087208820892090209120922093209420952096209720982099210021012102210321042105210621072108210921102111211221132114211521162117211821192120212121222123212421252126212721282129213021312132213321342135213621372138213921402141214221432144214521462147214821492150215121522153215421552156215721582159216021612162216321642165216621672168216921702171217221732174217521762177217821792180218121822183218421852186218721882189219021912192219321942195219621972198219922002201220222032204220522062207220822092210221122122213221422152216221722182219222022212222222322242225222622272228222922302231223222332234223522362237223822392240224122422243224422452246224722482249225022512252225322542255225622572258225922602261226222632264226522662267226822692270227122722273227422752276227722782279228022812282228322842285228622872288228922902291229222932294229522962297229822992300230123022303230423052306230723082309231023112312231323142315231623172318231923202321232223232324232523262327232823292330233123322333233423352336233723382339234023412342234323442345234623472348234923502351235223532354235523562357235823592360236123622363236423652366236723682369237023712372237323742375237623772378237923802381238223832384238523862387238823892390239123922393239423952396239723982399240024012402240324042405240624072408240924102411241224132414241524162417241824192420242124222423242424252426242724282429243024312432243324342435243624372438243924402441244224432444244524462447244824492450245124522453
  1. # Doxyfile 1.8.13
  2. # This file describes the settings to be used by the documentation system
  3. # doxygen (www.doxygen.org) for a project.
  4. #
  5. # All text after a double hash (##) is considered a comment and is placed in
  6. # front of the TAG it is preceding.
  7. #
  8. # All text after a single hash (#) is considered a comment and will be ignored.
  9. # The format is:
  10. # TAG = value [value, ...]
  11. # For lists, items can also be appended using:
  12. # TAG += value [value, ...]
  13. # Values that contain spaces should be placed between quotes (\" \").
  14. #---------------------------------------------------------------------------
  15. # Project related configuration options
  16. #---------------------------------------------------------------------------
  17. # This tag specifies the encoding used for all characters in the config file
  18. # that follow. The default is UTF-8 which is also the encoding used for all text
  19. # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
  20. # built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
  21. # for the list of possible encodings.
  22. # The default value is: UTF-8.
  23. DOXYFILE_ENCODING = UTF-8
  24. # The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
  25. # double-quotes, unless you are using Doxywizard) that should identify the
  26. # project for which the documentation is generated. This name is used in the
  27. # title of most generated pages and in a few other places.
  28. # The default value is: My Project.
  29. PROJECT_NAME = "Lggr"
  30. # The PROJECT_NUMBER tag can be used to enter a project or revision number. This
  31. # could be handy for archiving the generated documentation or if some version
  32. # control system is used.
  33. PROJECT_NUMBER =
  34. # Using the PROJECT_BRIEF tag one can provide an optional one line description
  35. # for a project that appears at the top of each page and should give viewer a
  36. # quick idea about the purpose of the project. Keep the description short.
  37. PROJECT_BRIEF =
  38. # With the PROJECT_LOGO tag one can specify a logo or an icon that is included
  39. # in the documentation. The maximum height of the logo should not exceed 55
  40. # pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
  41. # the logo to the output directory.
  42. PROJECT_LOGO =
  43. # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
  44. # into which the generated documentation will be written. If a relative path is
  45. # entered, it will be relative to the location where doxygen was started. If
  46. # left blank the current directory will be used.
  47. OUTPUT_DIRECTORY = doc
  48. # If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
  49. # directories (in 2 levels) under the output directory of each output format and
  50. # will distribute the generated files over these directories. Enabling this
  51. # option can be useful when feeding doxygen a huge amount of source files, where
  52. # putting all generated files in the same directory would otherwise causes
  53. # performance problems for the file system.
  54. # The default value is: NO.
  55. CREATE_SUBDIRS = NO
  56. # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
  57. # characters to appear in the names of generated files. If set to NO, non-ASCII
  58. # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
  59. # U+3044.
  60. # The default value is: NO.
  61. ALLOW_UNICODE_NAMES = NO
  62. # The OUTPUT_LANGUAGE tag is used to specify the language in which all
  63. # documentation generated by doxygen is written. Doxygen will use this
  64. # information to generate all constant output in the proper language.
  65. # Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
  66. # Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
  67. # Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
  68. # Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
  69. # Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
  70. # Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
  71. # Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
  72. # Ukrainian and Vietnamese.
  73. # The default value is: English.
  74. OUTPUT_LANGUAGE = English
  75. # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
  76. # descriptions after the members that are listed in the file and class
  77. # documentation (similar to Javadoc). Set to NO to disable this.
  78. # The default value is: YES.
  79. BRIEF_MEMBER_DESC = YES
  80. # If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
  81. # description of a member or function before the detailed description
  82. #
  83. # Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
  84. # brief descriptions will be completely suppressed.
  85. # The default value is: YES.
  86. REPEAT_BRIEF = YES
  87. # This tag implements a quasi-intelligent brief description abbreviator that is
  88. # used to form the text in various listings. Each string in this list, if found
  89. # as the leading text of the brief description, will be stripped from the text
  90. # and the result, after processing the whole list, is used as the annotated
  91. # text. Otherwise, the brief description is used as-is. If left blank, the
  92. # following values are used ($name is automatically replaced with the name of
  93. # the entity):The $name class, The $name widget, The $name file, is, provides,
  94. # specifies, contains, represents, a, an and the.
  95. ABBREVIATE_BRIEF = "The $name class" \
  96. "The $name widget" \
  97. "The $name file" \
  98. is \
  99. provides \
  100. specifies \
  101. contains \
  102. represents \
  103. a \
  104. an \
  105. the
  106. # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
  107. # doxygen will generate a detailed section even if there is only a brief
  108. # description.
  109. # The default value is: NO.
  110. ALWAYS_DETAILED_SEC = NO
  111. # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
  112. # inherited members of a class in the documentation of that class as if those
  113. # members were ordinary class members. Constructors, destructors and assignment
  114. # operators of the base classes will not be shown.
  115. # The default value is: NO.
  116. INLINE_INHERITED_MEMB = NO
  117. # If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
  118. # before files name in the file list and in the header files. If set to NO the
  119. # shortest path that makes the file name unique will be used
  120. # The default value is: YES.
  121. FULL_PATH_NAMES = YES
  122. # The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
  123. # Stripping is only done if one of the specified strings matches the left-hand
  124. # part of the path. The tag can be used to show relative paths in the file list.
  125. # If left blank the directory from which doxygen is run is used as the path to
  126. # strip.
  127. #
  128. # Note that you can specify absolute paths here, but also relative paths, which
  129. # will be relative from the directory where doxygen is started.
  130. # This tag requires that the tag FULL_PATH_NAMES is set to YES.
  131. STRIP_FROM_PATH =
  132. # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
  133. # path mentioned in the documentation of a class, which tells the reader which
  134. # header file to include in order to use a class. If left blank only the name of
  135. # the header file containing the class definition is used. Otherwise one should
  136. # specify the list of include paths that are normally passed to the compiler
  137. # using the -I flag.
  138. STRIP_FROM_INC_PATH =
  139. # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
  140. # less readable) file names. This can be useful is your file systems doesn't
  141. # support long names like on DOS, Mac, or CD-ROM.
  142. # The default value is: NO.
  143. SHORT_NAMES = NO
  144. # If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
  145. # first line (until the first dot) of a Javadoc-style comment as the brief
  146. # description. If set to NO, the Javadoc-style will behave just like regular Qt-
  147. # style comments (thus requiring an explicit @brief command for a brief
  148. # description.)
  149. # The default value is: NO.
  150. JAVADOC_AUTOBRIEF = NO
  151. # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
  152. # line (until the first dot) of a Qt-style comment as the brief description. If
  153. # set to NO, the Qt-style will behave just like regular Qt-style comments (thus
  154. # requiring an explicit \brief command for a brief description.)
  155. # The default value is: NO.
  156. QT_AUTOBRIEF = NO
  157. # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
  158. # multi-line C++ special comment block (i.e. a block of //! or /// comments) as
  159. # a brief description. This used to be the default behavior. The new default is
  160. # to treat a multi-line C++ comment block as a detailed description. Set this
  161. # tag to YES if you prefer the old behavior instead.
  162. #
  163. # Note that setting this tag to YES also means that rational rose comments are
  164. # not recognized any more.
  165. # The default value is: NO.
  166. MULTILINE_CPP_IS_BRIEF = NO
  167. # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
  168. # documentation from any documented member that it re-implements.
  169. # The default value is: YES.
  170. INHERIT_DOCS = YES
  171. # If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
  172. # page for each member. If set to NO, the documentation of a member will be part
  173. # of the file/class/namespace that contains it.
  174. # The default value is: NO.
  175. SEPARATE_MEMBER_PAGES = NO
  176. # The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
  177. # uses this value to replace tabs by spaces in code fragments.
  178. # Minimum value: 1, maximum value: 16, default value: 4.
  179. TAB_SIZE = 4
  180. # This tag can be used to specify a number of aliases that act as commands in
  181. # the documentation. An alias has the form:
  182. # name=value
  183. # For example adding
  184. # "sideeffect=@par Side Effects:\n"
  185. # will allow you to put the command \sideeffect (or @sideeffect) in the
  186. # documentation, which will result in a user-defined paragraph with heading
  187. # "Side Effects:". You can put \n's in the value part of an alias to insert
  188. # newlines.
  189. ALIASES =
  190. # This tag can be used to specify a number of word-keyword mappings (TCL only).
  191. # A mapping has the form "name=value". For example adding "class=itcl::class"
  192. # will allow you to use the command class in the itcl::class meaning.
  193. TCL_SUBST =
  194. # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
  195. # only. Doxygen will then generate output that is more tailored for C. For
  196. # instance, some of the names that are used will be different. The list of all
  197. # members will be omitted, etc.
  198. # The default value is: NO.
  199. OPTIMIZE_OUTPUT_FOR_C = NO
  200. # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
  201. # Python sources only. Doxygen will then generate output that is more tailored
  202. # for that language. For instance, namespaces will be presented as packages,
  203. # qualified scopes will look different, etc.
  204. # The default value is: NO.
  205. OPTIMIZE_OUTPUT_JAVA = NO
  206. # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
  207. # sources. Doxygen will then generate output that is tailored for Fortran.
  208. # The default value is: NO.
  209. OPTIMIZE_FOR_FORTRAN = NO
  210. # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
  211. # sources. Doxygen will then generate output that is tailored for VHDL.
  212. # The default value is: NO.
  213. OPTIMIZE_OUTPUT_VHDL = NO
  214. # Doxygen selects the parser to use depending on the extension of the files it
  215. # parses. With this tag you can assign which parser to use for a given
  216. # extension. Doxygen has a built-in mapping, but you can override or extend it
  217. # using this tag. The format is ext=language, where ext is a file extension, and
  218. # language is one of the parsers supported by doxygen: IDL, Java, Javascript,
  219. # C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
  220. # FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
  221. # Fortran. In the later case the parser tries to guess whether the code is fixed
  222. # or free formatted code, this is the default for Fortran type files), VHDL. For
  223. # instance to make doxygen treat .inc files as Fortran files (default is PHP),
  224. # and .f files as C (default is Fortran), use: inc=Fortran f=C.
  225. #
  226. # Note: For files without extension you can use no_extension as a placeholder.
  227. #
  228. # Note that for custom extensions you also need to set FILE_PATTERNS otherwise
  229. # the files are not read by doxygen.
  230. EXTENSION_MAPPING =
  231. # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
  232. # according to the Markdown format, which allows for more readable
  233. # documentation. See http://daringfireball.net/projects/markdown/ for details.
  234. # The output of markdown processing is further processed by doxygen, so you can
  235. # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
  236. # case of backward compatibilities issues.
  237. # The default value is: YES.
  238. MARKDOWN_SUPPORT = YES
  239. # When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up
  240. # to that level are automatically included in the table of contents, even if
  241. # they do not have an id attribute.
  242. # Note: This feature currently applies only to Markdown headings.
  243. # Minimum value: 0, maximum value: 99, default value: 0.
  244. # This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
  245. TOC_INCLUDE_HEADINGS = 0
  246. # When enabled doxygen tries to link words that correspond to documented
  247. # classes, or namespaces to their corresponding documentation. Such a link can
  248. # be prevented in individual cases by putting a % sign in front of the word or
  249. # globally by setting AUTOLINK_SUPPORT to NO.
  250. # The default value is: YES.
  251. AUTOLINK_SUPPORT = YES
  252. # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
  253. # to include (a tag file for) the STL sources as input, then you should set this
  254. # tag to YES in order to let doxygen match functions declarations and
  255. # definitions whose arguments contain STL classes (e.g. func(std::string);
  256. # versus func(std::string) {}). This also make the inheritance and collaboration
  257. # diagrams that involve STL classes more complete and accurate.
  258. # The default value is: NO.
  259. BUILTIN_STL_SUPPORT = NO
  260. # If you use Microsoft's C++/CLI language, you should set this option to YES to
  261. # enable parsing support.
  262. # The default value is: NO.
  263. CPP_CLI_SUPPORT = NO
  264. # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
  265. # http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
  266. # will parse them like normal C++ but will assume all classes use public instead
  267. # of private inheritance when no explicit protection keyword is present.
  268. # The default value is: NO.
  269. SIP_SUPPORT = NO
  270. # For Microsoft's IDL there are propget and propput attributes to indicate
  271. # getter and setter methods for a property. Setting this option to YES will make
  272. # doxygen to replace the get and set methods by a property in the documentation.
  273. # This will only work if the methods are indeed getting or setting a simple
  274. # type. If this is not the case, or you want to show the methods anyway, you
  275. # should set this option to NO.
  276. # The default value is: YES.
  277. IDL_PROPERTY_SUPPORT = YES
  278. # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
  279. # tag is set to YES then doxygen will reuse the documentation of the first
  280. # member in the group (if any) for the other members of the group. By default
  281. # all members of a group must be documented explicitly.
  282. # The default value is: NO.
  283. DISTRIBUTE_GROUP_DOC = NO
  284. # If one adds a struct or class to a group and this option is enabled, then also
  285. # any nested class or struct is added to the same group. By default this option
  286. # is disabled and one has to add nested compounds explicitly via \ingroup.
  287. # The default value is: NO.
  288. GROUP_NESTED_COMPOUNDS = NO
  289. # Set the SUBGROUPING tag to YES to allow class member groups of the same type
  290. # (for instance a group of public functions) to be put as a subgroup of that
  291. # type (e.g. under the Public Functions section). Set it to NO to prevent
  292. # subgrouping. Alternatively, this can be done per class using the
  293. # \nosubgrouping command.
  294. # The default value is: YES.
  295. SUBGROUPING = YES
  296. # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
  297. # are shown inside the group in which they are included (e.g. using \ingroup)
  298. # instead of on a separate page (for HTML and Man pages) or section (for LaTeX
  299. # and RTF).
  300. #
  301. # Note that this feature does not work in combination with
  302. # SEPARATE_MEMBER_PAGES.
  303. # The default value is: NO.
  304. INLINE_GROUPED_CLASSES = NO
  305. # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
  306. # with only public data fields or simple typedef fields will be shown inline in
  307. # the documentation of the scope in which they are defined (i.e. file,
  308. # namespace, or group documentation), provided this scope is documented. If set
  309. # to NO, structs, classes, and unions are shown on a separate page (for HTML and
  310. # Man pages) or section (for LaTeX and RTF).
  311. # The default value is: NO.
  312. INLINE_SIMPLE_STRUCTS = NO
  313. # When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
  314. # enum is documented as struct, union, or enum with the name of the typedef. So
  315. # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
  316. # with name TypeT. When disabled the typedef will appear as a member of a file,
  317. # namespace, or class. And the struct will be named TypeS. This can typically be
  318. # useful for C code in case the coding convention dictates that all compound
  319. # types are typedef'ed and only the typedef is referenced, never the tag name.
  320. # The default value is: NO.
  321. TYPEDEF_HIDES_STRUCT = NO
  322. # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
  323. # cache is used to resolve symbols given their name and scope. Since this can be
  324. # an expensive process and often the same symbol appears multiple times in the
  325. # code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
  326. # doxygen will become slower. If the cache is too large, memory is wasted. The
  327. # cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
  328. # is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
  329. # symbols. At the end of a run doxygen will report the cache usage and suggest
  330. # the optimal cache size from a speed point of view.
  331. # Minimum value: 0, maximum value: 9, default value: 0.
  332. LOOKUP_CACHE_SIZE = 0
  333. #---------------------------------------------------------------------------
  334. # Build related configuration options
  335. #---------------------------------------------------------------------------
  336. # If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
  337. # documentation are documented, even if no documentation was available. Private
  338. # class members and static file members will be hidden unless the
  339. # EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
  340. # Note: This will also disable the warnings about undocumented members that are
  341. # normally produced when WARNINGS is set to YES.
  342. # The default value is: NO.
  343. EXTRACT_ALL = NO
  344. # If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
  345. # be included in the documentation.
  346. # The default value is: NO.
  347. EXTRACT_PRIVATE = NO
  348. # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
  349. # scope will be included in the documentation.
  350. # The default value is: NO.
  351. EXTRACT_PACKAGE = NO
  352. # If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
  353. # included in the documentation.
  354. # The default value is: NO.
  355. EXTRACT_STATIC = NO
  356. # If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
  357. # locally in source files will be included in the documentation. If set to NO,
  358. # only classes defined in header files are included. Does not have any effect
  359. # for Java sources.
  360. # The default value is: YES.
  361. EXTRACT_LOCAL_CLASSES = YES
  362. # This flag is only useful for Objective-C code. If set to YES, local methods,
  363. # which are defined in the implementation section but not in the interface are
  364. # included in the documentation. If set to NO, only methods in the interface are
  365. # included.
  366. # The default value is: NO.
  367. EXTRACT_LOCAL_METHODS = NO
  368. # If this flag is set to YES, the members of anonymous namespaces will be
  369. # extracted and appear in the documentation as a namespace called
  370. # 'anonymous_namespace{file}', where file will be replaced with the base name of
  371. # the file that contains the anonymous namespace. By default anonymous namespace
  372. # are hidden.
  373. # The default value is: NO.
  374. EXTRACT_ANON_NSPACES = NO
  375. # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
  376. # undocumented members inside documented classes or files. If set to NO these
  377. # members will be included in the various overviews, but no documentation
  378. # section is generated. This option has no effect if EXTRACT_ALL is enabled.
  379. # The default value is: NO.
  380. HIDE_UNDOC_MEMBERS = NO
  381. # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
  382. # undocumented classes that are normally visible in the class hierarchy. If set
  383. # to NO, these classes will be included in the various overviews. This option
  384. # has no effect if EXTRACT_ALL is enabled.
  385. # The default value is: NO.
  386. HIDE_UNDOC_CLASSES = NO
  387. # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
  388. # (class|struct|union) declarations. If set to NO, these declarations will be
  389. # included in the documentation.
  390. # The default value is: NO.
  391. HIDE_FRIEND_COMPOUNDS = NO
  392. # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
  393. # documentation blocks found inside the body of a function. If set to NO, these
  394. # blocks will be appended to the function's detailed documentation block.
  395. # The default value is: NO.
  396. HIDE_IN_BODY_DOCS = NO
  397. # The INTERNAL_DOCS tag determines if documentation that is typed after a
  398. # \internal command is included. If the tag is set to NO then the documentation
  399. # will be excluded. Set it to YES to include the internal documentation.
  400. # The default value is: NO.
  401. INTERNAL_DOCS = NO
  402. # If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
  403. # names in lower-case letters. If set to YES, upper-case letters are also
  404. # allowed. This is useful if you have classes or files whose names only differ
  405. # in case and if your file system supports case sensitive file names. Windows
  406. # and Mac users are advised to set this option to NO.
  407. # The default value is: system dependent.
  408. CASE_SENSE_NAMES = YES
  409. # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
  410. # their full class and namespace scopes in the documentation. If set to YES, the
  411. # scope will be hidden.
  412. # The default value is: NO.
  413. HIDE_SCOPE_NAMES = NO
  414. # If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
  415. # append additional text to a page's title, such as Class Reference. If set to
  416. # YES the compound reference will be hidden.
  417. # The default value is: NO.
  418. HIDE_COMPOUND_REFERENCE= NO
  419. # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
  420. # the files that are included by a file in the documentation of that file.
  421. # The default value is: YES.
  422. SHOW_INCLUDE_FILES = YES
  423. # If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
  424. # grouped member an include statement to the documentation, telling the reader
  425. # which file to include in order to use the member.
  426. # The default value is: NO.
  427. SHOW_GROUPED_MEMB_INC = NO
  428. # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
  429. # files with double quotes in the documentation rather than with sharp brackets.
  430. # The default value is: NO.
  431. FORCE_LOCAL_INCLUDES = NO
  432. # If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
  433. # documentation for inline members.
  434. # The default value is: YES.
  435. INLINE_INFO = YES
  436. # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
  437. # (detailed) documentation of file and class members alphabetically by member
  438. # name. If set to NO, the members will appear in declaration order.
  439. # The default value is: YES.
  440. SORT_MEMBER_DOCS = YES
  441. # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
  442. # descriptions of file, namespace and class members alphabetically by member
  443. # name. If set to NO, the members will appear in declaration order. Note that
  444. # this will also influence the order of the classes in the class list.
  445. # The default value is: NO.
  446. SORT_BRIEF_DOCS = NO
  447. # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
  448. # (brief and detailed) documentation of class members so that constructors and
  449. # destructors are listed first. If set to NO the constructors will appear in the
  450. # respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
  451. # Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
  452. # member documentation.
  453. # Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
  454. # detailed member documentation.
  455. # The default value is: NO.
  456. SORT_MEMBERS_CTORS_1ST = NO
  457. # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
  458. # of group names into alphabetical order. If set to NO the group names will
  459. # appear in their defined order.
  460. # The default value is: NO.
  461. SORT_GROUP_NAMES = NO
  462. # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
  463. # fully-qualified names, including namespaces. If set to NO, the class list will
  464. # be sorted only by class name, not including the namespace part.
  465. # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
  466. # Note: This option applies only to the class list, not to the alphabetical
  467. # list.
  468. # The default value is: NO.
  469. SORT_BY_SCOPE_NAME = NO
  470. # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
  471. # type resolution of all parameters of a function it will reject a match between
  472. # the prototype and the implementation of a member function even if there is
  473. # only one candidate or it is obvious which candidate to choose by doing a
  474. # simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
  475. # accept a match between prototype and implementation in such cases.
  476. # The default value is: NO.
  477. STRICT_PROTO_MATCHING = NO
  478. # The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
  479. # list. This list is created by putting \todo commands in the documentation.
  480. # The default value is: YES.
  481. GENERATE_TODOLIST = YES
  482. # The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
  483. # list. This list is created by putting \test commands in the documentation.
  484. # The default value is: YES.
  485. GENERATE_TESTLIST = YES
  486. # The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
  487. # list. This list is created by putting \bug commands in the documentation.
  488. # The default value is: YES.
  489. GENERATE_BUGLIST = YES
  490. # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
  491. # the deprecated list. This list is created by putting \deprecated commands in
  492. # the documentation.
  493. # The default value is: YES.
  494. GENERATE_DEPRECATEDLIST= YES
  495. # The ENABLED_SECTIONS tag can be used to enable conditional documentation
  496. # sections, marked by \if <section_label> ... \endif and \cond <section_label>
  497. # ... \endcond blocks.
  498. ENABLED_SECTIONS =
  499. # The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
  500. # initial value of a variable or macro / define can have for it to appear in the
  501. # documentation. If the initializer consists of more lines than specified here
  502. # it will be hidden. Use a value of 0 to hide initializers completely. The
  503. # appearance of the value of individual variables and macros / defines can be
  504. # controlled using \showinitializer or \hideinitializer command in the
  505. # documentation regardless of this setting.
  506. # Minimum value: 0, maximum value: 10000, default value: 30.
  507. MAX_INITIALIZER_LINES = 30
  508. # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
  509. # the bottom of the documentation of classes and structs. If set to YES, the
  510. # list will mention the files that were used to generate the documentation.
  511. # The default value is: YES.
  512. SHOW_USED_FILES = YES
  513. # Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
  514. # will remove the Files entry from the Quick Index and from the Folder Tree View
  515. # (if specified).
  516. # The default value is: YES.
  517. SHOW_FILES = YES
  518. # Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
  519. # page. This will remove the Namespaces entry from the Quick Index and from the
  520. # Folder Tree View (if specified).
  521. # The default value is: YES.
  522. SHOW_NAMESPACES = YES
  523. # The FILE_VERSION_FILTER tag can be used to specify a program or script that
  524. # doxygen should invoke to get the current version for each file (typically from
  525. # the version control system). Doxygen will invoke the program by executing (via
  526. # popen()) the command command input-file, where command is the value of the
  527. # FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
  528. # by doxygen. Whatever the program writes to standard output is used as the file
  529. # version. For an example see the documentation.
  530. FILE_VERSION_FILTER =
  531. # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
  532. # by doxygen. The layout file controls the global structure of the generated
  533. # output files in an output format independent way. To create the layout file
  534. # that represents doxygen's defaults, run doxygen with the -l option. You can
  535. # optionally specify a file name after the option, if omitted DoxygenLayout.xml
  536. # will be used as the name of the layout file.
  537. #
  538. # Note that if you run doxygen from a directory containing a file called
  539. # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
  540. # tag is left empty.
  541. LAYOUT_FILE =
  542. # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
  543. # the reference definitions. This must be a list of .bib files. The .bib
  544. # extension is automatically appended if omitted. This requires the bibtex tool
  545. # to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
  546. # For LaTeX the style of the bibliography can be controlled using
  547. # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
  548. # search path. See also \cite for info how to create references.
  549. CITE_BIB_FILES =
  550. #---------------------------------------------------------------------------
  551. # Configuration options related to warning and progress messages
  552. #---------------------------------------------------------------------------
  553. # The QUIET tag can be used to turn on/off the messages that are generated to
  554. # standard output by doxygen. If QUIET is set to YES this implies that the
  555. # messages are off.
  556. # The default value is: NO.
  557. QUIET = NO
  558. # The WARNINGS tag can be used to turn on/off the warning messages that are
  559. # generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
  560. # this implies that the warnings are on.
  561. #
  562. # Tip: Turn warnings on while writing the documentation.
  563. # The default value is: YES.
  564. WARNINGS = YES
  565. # If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
  566. # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
  567. # will automatically be disabled.
  568. # The default value is: YES.
  569. WARN_IF_UNDOCUMENTED = YES
  570. # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
  571. # potential errors in the documentation, such as not documenting some parameters
  572. # in a documented function, or documenting parameters that don't exist or using
  573. # markup commands wrongly.
  574. # The default value is: YES.
  575. WARN_IF_DOC_ERROR = YES
  576. # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
  577. # are documented, but have no documentation for their parameters or return
  578. # value. If set to NO, doxygen will only warn about wrong or incomplete
  579. # parameter documentation, but not about the absence of documentation.
  580. # The default value is: NO.
  581. WARN_NO_PARAMDOC = NO
  582. # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
  583. # a warning is encountered.
  584. # The default value is: NO.
  585. WARN_AS_ERROR = NO
  586. # The WARN_FORMAT tag determines the format of the warning messages that doxygen
  587. # can produce. The string should contain the $file, $line, and $text tags, which
  588. # will be replaced by the file and line number from which the warning originated
  589. # and the warning text. Optionally the format may contain $version, which will
  590. # be replaced by the version of the file (if it could be obtained via
  591. # FILE_VERSION_FILTER)
  592. # The default value is: $file:$line: $text.
  593. WARN_FORMAT = "$file:$line: $text"
  594. # The WARN_LOGFILE tag can be used to specify a file to which warning and error
  595. # messages should be written. If left blank the output is written to standard
  596. # error (stderr).
  597. WARN_LOGFILE =
  598. #---------------------------------------------------------------------------
  599. # Configuration options related to the input files
  600. #---------------------------------------------------------------------------
  601. # The INPUT tag is used to specify the files and/or directories that contain
  602. # documented source files. You may enter file names like myfile.cpp or
  603. # directories like /usr/src/myproject. Separate the files or directories with
  604. # spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
  605. # Note: If this tag is empty the current directory is searched.
  606. INPUT =
  607. # This tag can be used to specify the character encoding of the source files
  608. # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
  609. # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
  610. # documentation (see: http://www.gnu.org/software/libiconv) for the list of
  611. # possible encodings.
  612. # The default value is: UTF-8.
  613. INPUT_ENCODING = UTF-8
  614. # If the value of the INPUT tag contains directories, you can use the
  615. # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
  616. # *.h) to filter out the source-files in the directories.
  617. #
  618. # Note that for custom extensions or not directly supported extensions you also
  619. # need to set EXTENSION_MAPPING for the extension otherwise the files are not
  620. # read by doxygen.
  621. #
  622. # If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
  623. # *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
  624. # *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
  625. # *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,
  626. # *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf and *.qsf.
  627. FILE_PATTERNS = *.php \
  628. *.inc \
  629. *.js
  630. # The RECURSIVE tag can be used to specify whether or not subdirectories should
  631. # be searched for input files as well.
  632. # The default value is: NO.
  633. RECURSIVE = YES
  634. # The EXCLUDE tag can be used to specify files and/or directories that should be
  635. # excluded from the INPUT source files. This way you can easily exclude a
  636. # subdirectory from a directory tree whose root is specified with the INPUT tag.
  637. #
  638. # Note that relative paths are relative to the directory from which doxygen is
  639. # run.
  640. EXCLUDE =
  641. # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
  642. # directories that are symbolic links (a Unix file system feature) are excluded
  643. # from the input.
  644. # The default value is: NO.
  645. EXCLUDE_SYMLINKS = NO
  646. # If the value of the INPUT tag contains directories, you can use the
  647. # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
  648. # certain files from those directories.
  649. #
  650. # Note that the wildcards are matched against the file with absolute path, so to
  651. # exclude all test directories for example use the pattern */test/*
  652. EXCLUDE_PATTERNS =
  653. # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
  654. # (namespaces, classes, functions, etc.) that should be excluded from the
  655. # output. The symbol name can be a fully qualified name, a word, or if the
  656. # wildcard * is used, a substring. Examples: ANamespace, AClass,
  657. # AClass::ANamespace, ANamespace::*Test
  658. #
  659. # Note that the wildcards are matched against the file with absolute path, so to
  660. # exclude all test directories use the pattern */test/*
  661. EXCLUDE_SYMBOLS =
  662. # The EXAMPLE_PATH tag can be used to specify one or more files or directories
  663. # that contain example code fragments that are included (see the \include
  664. # command).
  665. EXAMPLE_PATH =
  666. # If the value of the EXAMPLE_PATH tag contains directories, you can use the
  667. # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
  668. # *.h) to filter out the source-files in the directories. If left blank all
  669. # files are included.
  670. EXAMPLE_PATTERNS = *
  671. # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
  672. # searched for input files to be used with the \include or \dontinclude commands
  673. # irrespective of the value of the RECURSIVE tag.
  674. # The default value is: NO.
  675. EXAMPLE_RECURSIVE = NO
  676. # The IMAGE_PATH tag can be used to specify one or more files or directories
  677. # that contain images that are to be included in the documentation (see the
  678. # \image command).
  679. IMAGE_PATH =
  680. # The INPUT_FILTER tag can be used to specify a program that doxygen should
  681. # invoke to filter for each input file. Doxygen will invoke the filter program
  682. # by executing (via popen()) the command:
  683. #
  684. # <filter> <input-file>
  685. #
  686. # where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
  687. # name of an input file. Doxygen will then use the output that the filter
  688. # program writes to standard output. If FILTER_PATTERNS is specified, this tag
  689. # will be ignored.
  690. #
  691. # Note that the filter must not add or remove lines; it is applied before the
  692. # code is scanned, but not when the output code is generated. If lines are added
  693. # or removed, the anchors will not be placed correctly.
  694. #
  695. # Note that for custom extensions or not directly supported extensions you also
  696. # need to set EXTENSION_MAPPING for the extension otherwise the files are not
  697. # properly processed by doxygen.
  698. INPUT_FILTER =
  699. # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
  700. # basis. Doxygen will compare the file name with each pattern and apply the
  701. # filter if there is a match. The filters are a list of the form: pattern=filter
  702. # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
  703. # filters are used. If the FILTER_PATTERNS tag is empty or if none of the
  704. # patterns match the file name, INPUT_FILTER is applied.
  705. #
  706. # Note that for custom extensions or not directly supported extensions you also
  707. # need to set EXTENSION_MAPPING for the extension otherwise the files are not
  708. # properly processed by doxygen.
  709. FILTER_PATTERNS =
  710. # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
  711. # INPUT_FILTER) will also be used to filter the input files that are used for
  712. # producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
  713. # The default value is: NO.
  714. FILTER_SOURCE_FILES = NO
  715. # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
  716. # pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
  717. # it is also possible to disable source filtering for a specific pattern using
  718. # *.ext= (so without naming a filter).
  719. # This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
  720. FILTER_SOURCE_PATTERNS =
  721. # If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
  722. # is part of the input, its contents will be placed on the main page
  723. # (index.html). This can be useful if you have a project on for instance GitHub
  724. # and want to reuse the introduction page also for the doxygen output.
  725. USE_MDFILE_AS_MAINPAGE =
  726. #---------------------------------------------------------------------------
  727. # Configuration options related to source browsing
  728. #---------------------------------------------------------------------------
  729. # If the SOURCE_BROWSER tag is set to YES then a list of source files will be
  730. # generated. Documented entities will be cross-referenced with these sources.
  731. #
  732. # Note: To get rid of all source code in the generated output, make sure that
  733. # also VERBATIM_HEADERS is set to NO.
  734. # The default value is: NO.
  735. SOURCE_BROWSER = NO
  736. # Setting the INLINE_SOURCES tag to YES will include the body of functions,
  737. # classes and enums directly into the documentation.
  738. # The default value is: NO.
  739. INLINE_SOURCES = NO
  740. # Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
  741. # special comment blocks from generated source code fragments. Normal C, C++ and
  742. # Fortran comments will always remain visible.
  743. # The default value is: YES.
  744. STRIP_CODE_COMMENTS = YES
  745. # If the REFERENCED_BY_RELATION tag is set to YES then for each documented
  746. # function all documented functions referencing it will be listed.
  747. # The default value is: NO.
  748. REFERENCED_BY_RELATION = NO
  749. # If the REFERENCES_RELATION tag is set to YES then for each documented function
  750. # all documented entities called/used by that function will be listed.
  751. # The default value is: NO.
  752. REFERENCES_RELATION = NO
  753. # If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
  754. # to YES then the hyperlinks from functions in REFERENCES_RELATION and
  755. # REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
  756. # link to the documentation.
  757. # The default value is: YES.
  758. REFERENCES_LINK_SOURCE = YES
  759. # If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
  760. # source code will show a tooltip with additional information such as prototype,
  761. # brief description and links to the definition and documentation. Since this
  762. # will make the HTML file larger and loading of large files a bit slower, you
  763. # can opt to disable this feature.
  764. # The default value is: YES.
  765. # This tag requires that the tag SOURCE_BROWSER is set to YES.
  766. SOURCE_TOOLTIPS = YES
  767. # If the USE_HTAGS tag is set to YES then the references to source code will
  768. # point to the HTML generated by the htags(1) tool instead of doxygen built-in
  769. # source browser. The htags tool is part of GNU's global source tagging system
  770. # (see http://www.gnu.org/software/global/global.html). You will need version
  771. # 4.8.6 or higher.
  772. #
  773. # To use it do the following:
  774. # - Install the latest version of global
  775. # - Enable SOURCE_BROWSER and USE_HTAGS in the config file
  776. # - Make sure the INPUT points to the root of the source tree
  777. # - Run doxygen as normal
  778. #
  779. # Doxygen will invoke htags (and that will in turn invoke gtags), so these
  780. # tools must be available from the command line (i.e. in the search path).
  781. #
  782. # The result: instead of the source browser generated by doxygen, the links to
  783. # source code will now point to the output of htags.
  784. # The default value is: NO.
  785. # This tag requires that the tag SOURCE_BROWSER is set to YES.
  786. USE_HTAGS = NO
  787. # If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
  788. # verbatim copy of the header file for each class for which an include is
  789. # specified. Set to NO to disable this.
  790. # See also: Section \class.
  791. # The default value is: YES.
  792. VERBATIM_HEADERS = YES
  793. # If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
  794. # clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
  795. # cost of reduced performance. This can be particularly helpful with template
  796. # rich C++ code for which doxygen's built-in parser lacks the necessary type
  797. # information.
  798. # Note: The availability of this option depends on whether or not doxygen was
  799. # generated with the -Duse-libclang=ON option for CMake.
  800. # The default value is: NO.
  801. CLANG_ASSISTED_PARSING = NO
  802. # If clang assisted parsing is enabled you can provide the compiler with command
  803. # line options that you would normally use when invoking the compiler. Note that
  804. # the include paths will already be set by doxygen for the files and directories
  805. # specified with INPUT and INCLUDE_PATH.
  806. # This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
  807. CLANG_OPTIONS =
  808. #---------------------------------------------------------------------------
  809. # Configuration options related to the alphabetical class index
  810. #---------------------------------------------------------------------------
  811. # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
  812. # compounds will be generated. Enable this if the project contains a lot of
  813. # classes, structs, unions or interfaces.
  814. # The default value is: YES.
  815. ALPHABETICAL_INDEX = YES
  816. # The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
  817. # which the alphabetical index list will be split.
  818. # Minimum value: 1, maximum value: 20, default value: 5.
  819. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
  820. COLS_IN_ALPHA_INDEX = 5
  821. # In case all classes in a project start with a common prefix, all classes will
  822. # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
  823. # can be used to specify a prefix (or a list of prefixes) that should be ignored
  824. # while generating the index headers.
  825. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
  826. IGNORE_PREFIX =
  827. #---------------------------------------------------------------------------
  828. # Configuration options related to the HTML output
  829. #---------------------------------------------------------------------------
  830. # If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
  831. # The default value is: YES.
  832. GENERATE_HTML = YES
  833. # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
  834. # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
  835. # it.
  836. # The default directory is: html.
  837. # This tag requires that the tag GENERATE_HTML is set to YES.
  838. HTML_OUTPUT = html
  839. # The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
  840. # generated HTML page (for example: .htm, .php, .asp).
  841. # The default value is: .html.
  842. # This tag requires that the tag GENERATE_HTML is set to YES.
  843. HTML_FILE_EXTENSION = .html
  844. # The HTML_HEADER tag can be used to specify a user-defined HTML header file for
  845. # each generated HTML page. If the tag is left blank doxygen will generate a
  846. # standard header.
  847. #
  848. # To get valid HTML the header file that includes any scripts and style sheets
  849. # that doxygen needs, which is dependent on the configuration options used (e.g.
  850. # the setting GENERATE_TREEVIEW). It is highly recommended to start with a
  851. # default header using
  852. # doxygen -w html new_header.html new_footer.html new_stylesheet.css
  853. # YourConfigFile
  854. # and then modify the file new_header.html. See also section "Doxygen usage"
  855. # for information on how to generate the default header that doxygen normally
  856. # uses.
  857. # Note: The header is subject to change so you typically have to regenerate the
  858. # default header when upgrading to a newer version of doxygen. For a description
  859. # of the possible markers and block names see the documentation.
  860. # This tag requires that the tag GENERATE_HTML is set to YES.
  861. HTML_HEADER =
  862. # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
  863. # generated HTML page. If the tag is left blank doxygen will generate a standard
  864. # footer. See HTML_HEADER for more information on how to generate a default
  865. # footer and what special commands can be used inside the footer. See also
  866. # section "Doxygen usage" for information on how to generate the default footer
  867. # that doxygen normally uses.
  868. # This tag requires that the tag GENERATE_HTML is set to YES.
  869. HTML_FOOTER =
  870. # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
  871. # sheet that is used by each HTML page. It can be used to fine-tune the look of
  872. # the HTML output. If left blank doxygen will generate a default style sheet.
  873. # See also section "Doxygen usage" for information on how to generate the style
  874. # sheet that doxygen normally uses.
  875. # Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
  876. # it is more robust and this tag (HTML_STYLESHEET) will in the future become
  877. # obsolete.
  878. # This tag requires that the tag GENERATE_HTML is set to YES.
  879. HTML_STYLESHEET =
  880. # The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
  881. # cascading style sheets that are included after the standard style sheets
  882. # created by doxygen. Using this option one can overrule certain style aspects.
  883. # This is preferred over using HTML_STYLESHEET since it does not replace the
  884. # standard style sheet and is therefore more robust against future updates.
  885. # Doxygen will copy the style sheet files to the output directory.
  886. # Note: The order of the extra style sheet files is of importance (e.g. the last
  887. # style sheet in the list overrules the setting of the previous ones in the
  888. # list). For an example see the documentation.
  889. # This tag requires that the tag GENERATE_HTML is set to YES.
  890. HTML_EXTRA_STYLESHEET =
  891. # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
  892. # other source files which should be copied to the HTML output directory. Note
  893. # that these files will be copied to the base HTML output directory. Use the
  894. # $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
  895. # files. In the HTML_STYLESHEET file, use the file name only. Also note that the
  896. # files will be copied as-is; there are no commands or markers available.
  897. # This tag requires that the tag GENERATE_HTML is set to YES.
  898. HTML_EXTRA_FILES =
  899. # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
  900. # will adjust the colors in the style sheet and background images according to
  901. # this color. Hue is specified as an angle on a colorwheel, see
  902. # http://en.wikipedia.org/wiki/Hue for more information. For instance the value
  903. # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
  904. # purple, and 360 is red again.
  905. # Minimum value: 0, maximum value: 359, default value: 220.
  906. # This tag requires that the tag GENERATE_HTML is set to YES.
  907. HTML_COLORSTYLE_HUE = 220
  908. # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
  909. # in the HTML output. For a value of 0 the output will use grayscales only. A
  910. # value of 255 will produce the most vivid colors.
  911. # Minimum value: 0, maximum value: 255, default value: 100.
  912. # This tag requires that the tag GENERATE_HTML is set to YES.
  913. HTML_COLORSTYLE_SAT = 100
  914. # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
  915. # luminance component of the colors in the HTML output. Values below 100
  916. # gradually make the output lighter, whereas values above 100 make the output
  917. # darker. The value divided by 100 is the actual gamma applied, so 80 represents
  918. # a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
  919. # change the gamma.
  920. # Minimum value: 40, maximum value: 240, default value: 80.
  921. # This tag requires that the tag GENERATE_HTML is set to YES.
  922. HTML_COLORSTYLE_GAMMA = 80
  923. # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
  924. # page will contain the date and time when the page was generated. Setting this
  925. # to YES can help to show when doxygen was last run and thus if the
  926. # documentation is up to date.
  927. # The default value is: NO.
  928. # This tag requires that the tag GENERATE_HTML is set to YES.
  929. HTML_TIMESTAMP = NO
  930. # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
  931. # documentation will contain sections that can be hidden and shown after the
  932. # page has loaded.
  933. # The default value is: NO.
  934. # This tag requires that the tag GENERATE_HTML is set to YES.
  935. HTML_DYNAMIC_SECTIONS = NO
  936. # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
  937. # shown in the various tree structured indices initially; the user can expand
  938. # and collapse entries dynamically later on. Doxygen will expand the tree to
  939. # such a level that at most the specified number of entries are visible (unless
  940. # a fully collapsed tree already exceeds this amount). So setting the number of
  941. # entries 1 will produce a full collapsed tree by default. 0 is a special value
  942. # representing an infinite number of entries and will result in a full expanded
  943. # tree by default.
  944. # Minimum value: 0, maximum value: 9999, default value: 100.
  945. # This tag requires that the tag GENERATE_HTML is set to YES.
  946. HTML_INDEX_NUM_ENTRIES = 100
  947. # If the GENERATE_DOCSET tag is set to YES, additional index files will be
  948. # generated that can be used as input for Apple's Xcode 3 integrated development
  949. # environment (see: http://developer.apple.com/tools/xcode/), introduced with
  950. # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
  951. # Makefile in the HTML output directory. Running make will produce the docset in
  952. # that directory and running make install will install the docset in
  953. # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
  954. # startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
  955. # for more information.
  956. # The default value is: NO.
  957. # This tag requires that the tag GENERATE_HTML is set to YES.
  958. GENERATE_DOCSET = NO
  959. # This tag determines the name of the docset feed. A documentation feed provides
  960. # an umbrella under which multiple documentation sets from a single provider
  961. # (such as a company or product suite) can be grouped.
  962. # The default value is: Doxygen generated docs.
  963. # This tag requires that the tag GENERATE_DOCSET is set to YES.
  964. DOCSET_FEEDNAME = "Doxygen generated docs"
  965. # This tag specifies a string that should uniquely identify the documentation
  966. # set bundle. This should be a reverse domain-name style string, e.g.
  967. # com.mycompany.MyDocSet. Doxygen will append .docset to the name.
  968. # The default value is: org.doxygen.Project.
  969. # This tag requires that the tag GENERATE_DOCSET is set to YES.
  970. DOCSET_BUNDLE_ID = org.doxygen.Project
  971. # The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
  972. # the documentation publisher. This should be a reverse domain-name style
  973. # string, e.g. com.mycompany.MyDocSet.documentation.
  974. # The default value is: org.doxygen.Publisher.
  975. # This tag requires that the tag GENERATE_DOCSET is set to YES.
  976. DOCSET_PUBLISHER_ID = org.doxygen.Publisher
  977. # The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
  978. # The default value is: Publisher.
  979. # This tag requires that the tag GENERATE_DOCSET is set to YES.
  980. DOCSET_PUBLISHER_NAME = Publisher
  981. # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
  982. # additional HTML index files: index.hhp, index.hhc, and index.hhk. The
  983. # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
  984. # (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
  985. # Windows.
  986. #
  987. # The HTML Help Workshop contains a compiler that can convert all HTML output
  988. # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
  989. # files are now used as the Windows 98 help format, and will replace the old
  990. # Windows help format (.hlp) on all Windows platforms in the future. Compressed
  991. # HTML files also contain an index, a table of contents, and you can search for
  992. # words in the documentation. The HTML workshop also contains a viewer for
  993. # compressed HTML files.
  994. # The default value is: NO.
  995. # This tag requires that the tag GENERATE_HTML is set to YES.
  996. GENERATE_HTMLHELP = NO
  997. # The CHM_FILE tag can be used to specify the file name of the resulting .chm
  998. # file. You can add a path in front of the file if the result should not be
  999. # written to the html output directory.
  1000. # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
  1001. CHM_FILE =
  1002. # The HHC_LOCATION tag can be used to specify the location (absolute path
  1003. # including file name) of the HTML help compiler (hhc.exe). If non-empty,
  1004. # doxygen will try to run the HTML help compiler on the generated index.hhp.
  1005. # The file has to be specified with full path.
  1006. # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
  1007. HHC_LOCATION =
  1008. # The GENERATE_CHI flag controls if a separate .chi index file is generated
  1009. # (YES) or that it should be included in the master .chm file (NO).
  1010. # The default value is: NO.
  1011. # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
  1012. GENERATE_CHI = NO
  1013. # The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
  1014. # and project file content.
  1015. # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
  1016. CHM_INDEX_ENCODING =
  1017. # The BINARY_TOC flag controls whether a binary table of contents is generated
  1018. # (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
  1019. # enables the Previous and Next buttons.
  1020. # The default value is: NO.
  1021. # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
  1022. BINARY_TOC = NO
  1023. # The TOC_EXPAND flag can be set to YES to add extra items for group members to
  1024. # the table of contents of the HTML help documentation and to the tree view.
  1025. # The default value is: NO.
  1026. # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
  1027. TOC_EXPAND = NO
  1028. # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
  1029. # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
  1030. # can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
  1031. # (.qch) of the generated HTML documentation.
  1032. # The default value is: NO.
  1033. # This tag requires that the tag GENERATE_HTML is set to YES.
  1034. GENERATE_QHP = NO
  1035. # If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
  1036. # the file name of the resulting .qch file. The path specified is relative to
  1037. # the HTML output folder.
  1038. # This tag requires that the tag GENERATE_QHP is set to YES.
  1039. QCH_FILE =
  1040. # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
  1041. # Project output. For more information please see Qt Help Project / Namespace
  1042. # (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
  1043. # The default value is: org.doxygen.Project.
  1044. # This tag requires that the tag GENERATE_QHP is set to YES.
  1045. QHP_NAMESPACE = org.doxygen.Project
  1046. # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
  1047. # Help Project output. For more information please see Qt Help Project / Virtual
  1048. # Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
  1049. # folders).
  1050. # The default value is: doc.
  1051. # This tag requires that the tag GENERATE_QHP is set to YES.
  1052. QHP_VIRTUAL_FOLDER = doc
  1053. # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
  1054. # filter to add. For more information please see Qt Help Project / Custom
  1055. # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
  1056. # filters).
  1057. # This tag requires that the tag GENERATE_QHP is set to YES.
  1058. QHP_CUST_FILTER_NAME =
  1059. # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
  1060. # custom filter to add. For more information please see Qt Help Project / Custom
  1061. # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
  1062. # filters).
  1063. # This tag requires that the tag GENERATE_QHP is set to YES.
  1064. QHP_CUST_FILTER_ATTRS =
  1065. # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
  1066. # project's filter section matches. Qt Help Project / Filter Attributes (see:
  1067. # http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
  1068. # This tag requires that the tag GENERATE_QHP is set to YES.
  1069. QHP_SECT_FILTER_ATTRS =
  1070. # The QHG_LOCATION tag can be used to specify the location of Qt's
  1071. # qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
  1072. # generated .qhp file.
  1073. # This tag requires that the tag GENERATE_QHP is set to YES.
  1074. QHG_LOCATION =
  1075. # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
  1076. # generated, together with the HTML files, they form an Eclipse help plugin. To
  1077. # install this plugin and make it available under the help contents menu in
  1078. # Eclipse, the contents of the directory containing the HTML and XML files needs
  1079. # to be copied into the plugins directory of eclipse. The name of the directory
  1080. # within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
  1081. # After copying Eclipse needs to be restarted before the help appears.
  1082. # The default value is: NO.
  1083. # This tag requires that the tag GENERATE_HTML is set to YES.
  1084. GENERATE_ECLIPSEHELP = NO
  1085. # A unique identifier for the Eclipse help plugin. When installing the plugin
  1086. # the directory name containing the HTML and XML files should also have this
  1087. # name. Each documentation set should have its own identifier.
  1088. # The default value is: org.doxygen.Project.
  1089. # This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
  1090. ECLIPSE_DOC_ID = org.doxygen.Project
  1091. # If you want full control over the layout of the generated HTML pages it might
  1092. # be necessary to disable the index and replace it with your own. The
  1093. # DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
  1094. # of each HTML page. A value of NO enables the index and the value YES disables
  1095. # it. Since the tabs in the index contain the same information as the navigation
  1096. # tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
  1097. # The default value is: NO.
  1098. # This tag requires that the tag GENERATE_HTML is set to YES.
  1099. DISABLE_INDEX = NO
  1100. # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
  1101. # structure should be generated to display hierarchical information. If the tag
  1102. # value is set to YES, a side panel will be generated containing a tree-like
  1103. # index structure (just like the one that is generated for HTML Help). For this
  1104. # to work a browser that supports JavaScript, DHTML, CSS and frames is required
  1105. # (i.e. any modern browser). Windows users are probably better off using the
  1106. # HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
  1107. # further fine-tune the look of the index. As an example, the default style
  1108. # sheet generated by doxygen has an example that shows how to put an image at
  1109. # the root of the tree instead of the PROJECT_NAME. Since the tree basically has
  1110. # the same information as the tab index, you could consider setting
  1111. # DISABLE_INDEX to YES when enabling this option.
  1112. # The default value is: NO.
  1113. # This tag requires that the tag GENERATE_HTML is set to YES.
  1114. GENERATE_TREEVIEW = NO
  1115. # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
  1116. # doxygen will group on one line in the generated HTML documentation.
  1117. #
  1118. # Note that a value of 0 will completely suppress the enum values from appearing
  1119. # in the overview section.
  1120. # Minimum value: 0, maximum value: 20, default value: 4.
  1121. # This tag requires that the tag GENERATE_HTML is set to YES.
  1122. ENUM_VALUES_PER_LINE = 4
  1123. # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
  1124. # to set the initial width (in pixels) of the frame in which the tree is shown.
  1125. # Minimum value: 0, maximum value: 1500, default value: 250.
  1126. # This tag requires that the tag GENERATE_HTML is set to YES.
  1127. TREEVIEW_WIDTH = 250
  1128. # If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
  1129. # external symbols imported via tag files in a separate window.
  1130. # The default value is: NO.
  1131. # This tag requires that the tag GENERATE_HTML is set to YES.
  1132. EXT_LINKS_IN_WINDOW = NO
  1133. # Use this tag to change the font size of LaTeX formulas included as images in
  1134. # the HTML documentation. When you change the font size after a successful
  1135. # doxygen run you need to manually remove any form_*.png images from the HTML
  1136. # output directory to force them to be regenerated.
  1137. # Minimum value: 8, maximum value: 50, default value: 10.
  1138. # This tag requires that the tag GENERATE_HTML is set to YES.
  1139. FORMULA_FONTSIZE = 10
  1140. # Use the FORMULA_TRANPARENT tag to determine whether or not the images
  1141. # generated for formulas are transparent PNGs. Transparent PNGs are not
  1142. # supported properly for IE 6.0, but are supported on all modern browsers.
  1143. #
  1144. # Note that when changing this option you need to delete any form_*.png files in
  1145. # the HTML output directory before the changes have effect.
  1146. # The default value is: YES.
  1147. # This tag requires that the tag GENERATE_HTML is set to YES.
  1148. FORMULA_TRANSPARENT = YES
  1149. # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
  1150. # http://www.mathjax.org) which uses client side Javascript for the rendering
  1151. # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
  1152. # installed or if you want to formulas look prettier in the HTML output. When
  1153. # enabled you may also need to install MathJax separately and configure the path
  1154. # to it using the MATHJAX_RELPATH option.
  1155. # The default value is: NO.
  1156. # This tag requires that the tag GENERATE_HTML is set to YES.
  1157. USE_MATHJAX = NO
  1158. # When MathJax is enabled you can set the default output format to be used for
  1159. # the MathJax output. See the MathJax site (see:
  1160. # http://docs.mathjax.org/en/latest/output.html) for more details.
  1161. # Possible values are: HTML-CSS (which is slower, but has the best
  1162. # compatibility), NativeMML (i.e. MathML) and SVG.
  1163. # The default value is: HTML-CSS.
  1164. # This tag requires that the tag USE_MATHJAX is set to YES.
  1165. MATHJAX_FORMAT = HTML-CSS
  1166. # When MathJax is enabled you need to specify the location relative to the HTML
  1167. # output directory using the MATHJAX_RELPATH option. The destination directory
  1168. # should contain the MathJax.js script. For instance, if the mathjax directory
  1169. # is located at the same level as the HTML output directory, then
  1170. # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
  1171. # Content Delivery Network so you can quickly see the result without installing
  1172. # MathJax. However, it is strongly recommended to install a local copy of
  1173. # MathJax from http://www.mathjax.org before deployment.
  1174. # The default value is: http://cdn.mathjax.org/mathjax/latest.
  1175. # This tag requires that the tag USE_MATHJAX is set to YES.
  1176. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
  1177. # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
  1178. # extension names that should be enabled during MathJax rendering. For example
  1179. # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
  1180. # This tag requires that the tag USE_MATHJAX is set to YES.
  1181. MATHJAX_EXTENSIONS =
  1182. # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
  1183. # of code that will be used on startup of the MathJax code. See the MathJax site
  1184. # (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
  1185. # example see the documentation.
  1186. # This tag requires that the tag USE_MATHJAX is set to YES.
  1187. MATHJAX_CODEFILE =
  1188. # When the SEARCHENGINE tag is enabled doxygen will generate a search box for
  1189. # the HTML output. The underlying search engine uses javascript and DHTML and
  1190. # should work on any modern browser. Note that when using HTML help
  1191. # (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
  1192. # there is already a search function so this one should typically be disabled.
  1193. # For large projects the javascript based search engine can be slow, then
  1194. # enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
  1195. # search using the keyboard; to jump to the search box use <access key> + S
  1196. # (what the <access key> is depends on the OS and browser, but it is typically
  1197. # <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
  1198. # key> to jump into the search results window, the results can be navigated
  1199. # using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
  1200. # the search. The filter options can be selected when the cursor is inside the
  1201. # search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
  1202. # to select a filter and <Enter> or <escape> to activate or cancel the filter
  1203. # option.
  1204. # The default value is: YES.
  1205. # This tag requires that the tag GENERATE_HTML is set to YES.
  1206. SEARCHENGINE = YES
  1207. # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
  1208. # implemented using a web server instead of a web client using Javascript. There
  1209. # are two flavors of web server based searching depending on the EXTERNAL_SEARCH
  1210. # setting. When disabled, doxygen will generate a PHP script for searching and
  1211. # an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
  1212. # and searching needs to be provided by external tools. See the section
  1213. # "External Indexing and Searching" for details.
  1214. # The default value is: NO.
  1215. # This tag requires that the tag SEARCHENGINE is set to YES.
  1216. SERVER_BASED_SEARCH = NO
  1217. # When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
  1218. # script for searching. Instead the search results are written to an XML file
  1219. # which needs to be processed by an external indexer. Doxygen will invoke an
  1220. # external search engine pointed to by the SEARCHENGINE_URL option to obtain the
  1221. # search results.
  1222. #
  1223. # Doxygen ships with an example indexer (doxyindexer) and search engine
  1224. # (doxysearch.cgi) which are based on the open source search engine library
  1225. # Xapian (see: http://xapian.org/).
  1226. #
  1227. # See the section "External Indexing and Searching" for details.
  1228. # The default value is: NO.
  1229. # This tag requires that the tag SEARCHENGINE is set to YES.
  1230. EXTERNAL_SEARCH = NO
  1231. # The SEARCHENGINE_URL should point to a search engine hosted by a web server
  1232. # which will return the search results when EXTERNAL_SEARCH is enabled.
  1233. #
  1234. # Doxygen ships with an example indexer (doxyindexer) and search engine
  1235. # (doxysearch.cgi) which are based on the open source search engine library
  1236. # Xapian (see: http://xapian.org/). See the section "External Indexing and
  1237. # Searching" for details.
  1238. # This tag requires that the tag SEARCHENGINE is set to YES.
  1239. SEARCHENGINE_URL =
  1240. # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
  1241. # search data is written to a file for indexing by an external tool. With the
  1242. # SEARCHDATA_FILE tag the name of this file can be specified.
  1243. # The default file is: searchdata.xml.
  1244. # This tag requires that the tag SEARCHENGINE is set to YES.
  1245. SEARCHDATA_FILE = searchdata.xml
  1246. # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
  1247. # EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
  1248. # useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
  1249. # projects and redirect the results back to the right project.
  1250. # This tag requires that the tag SEARCHENGINE is set to YES.
  1251. EXTERNAL_SEARCH_ID =
  1252. # The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
  1253. # projects other than the one defined by this configuration file, but that are
  1254. # all added to the same external search index. Each project needs to have a
  1255. # unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
  1256. # to a relative location where the documentation can be found. The format is:
  1257. # EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
  1258. # This tag requires that the tag SEARCHENGINE is set to YES.
  1259. EXTRA_SEARCH_MAPPINGS =
  1260. #---------------------------------------------------------------------------
  1261. # Configuration options related to the LaTeX output
  1262. #---------------------------------------------------------------------------
  1263. # If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
  1264. # The default value is: YES.
  1265. GENERATE_LATEX = YES
  1266. # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
  1267. # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
  1268. # it.
  1269. # The default directory is: latex.
  1270. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1271. LATEX_OUTPUT = latex
  1272. # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
  1273. # invoked.
  1274. #
  1275. # Note that when enabling USE_PDFLATEX this option is only used for generating
  1276. # bitmaps for formulas in the HTML output, but not in the Makefile that is
  1277. # written to the output directory.
  1278. # The default file is: latex.
  1279. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1280. LATEX_CMD_NAME = latex
  1281. # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
  1282. # index for LaTeX.
  1283. # The default file is: makeindex.
  1284. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1285. MAKEINDEX_CMD_NAME = makeindex
  1286. # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
  1287. # documents. This may be useful for small projects and may help to save some
  1288. # trees in general.
  1289. # The default value is: NO.
  1290. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1291. COMPACT_LATEX = NO
  1292. # The PAPER_TYPE tag can be used to set the paper type that is used by the
  1293. # printer.
  1294. # Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
  1295. # 14 inches) and executive (7.25 x 10.5 inches).
  1296. # The default value is: a4.
  1297. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1298. PAPER_TYPE = a4
  1299. # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
  1300. # that should be included in the LaTeX output. The package can be specified just
  1301. # by its name or with the correct syntax as to be used with the LaTeX
  1302. # \usepackage command. To get the times font for instance you can specify :
  1303. # EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}
  1304. # To use the option intlimits with the amsmath package you can specify:
  1305. # EXTRA_PACKAGES=[intlimits]{amsmath}
  1306. # If left blank no extra packages will be included.
  1307. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1308. EXTRA_PACKAGES =
  1309. # The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
  1310. # generated LaTeX document. The header should contain everything until the first
  1311. # chapter. If it is left blank doxygen will generate a standard header. See
  1312. # section "Doxygen usage" for information on how to let doxygen write the
  1313. # default header to a separate file.
  1314. #
  1315. # Note: Only use a user-defined header if you know what you are doing! The
  1316. # following commands have a special meaning inside the header: $title,
  1317. # $datetime, $date, $doxygenversion, $projectname, $projectnumber,
  1318. # $projectbrief, $projectlogo. Doxygen will replace $title with the empty
  1319. # string, for the replacement values of the other commands the user is referred
  1320. # to HTML_HEADER.
  1321. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1322. LATEX_HEADER =
  1323. # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
  1324. # generated LaTeX document. The footer should contain everything after the last
  1325. # chapter. If it is left blank doxygen will generate a standard footer. See
  1326. # LATEX_HEADER for more information on how to generate a default footer and what
  1327. # special commands can be used inside the footer.
  1328. #
  1329. # Note: Only use a user-defined footer if you know what you are doing!
  1330. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1331. LATEX_FOOTER =
  1332. # The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
  1333. # LaTeX style sheets that are included after the standard style sheets created
  1334. # by doxygen. Using this option one can overrule certain style aspects. Doxygen
  1335. # will copy the style sheet files to the output directory.
  1336. # Note: The order of the extra style sheet files is of importance (e.g. the last
  1337. # style sheet in the list overrules the setting of the previous ones in the
  1338. # list).
  1339. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1340. LATEX_EXTRA_STYLESHEET =
  1341. # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
  1342. # other source files which should be copied to the LATEX_OUTPUT output
  1343. # directory. Note that the files will be copied as-is; there are no commands or
  1344. # markers available.
  1345. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1346. LATEX_EXTRA_FILES =
  1347. # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
  1348. # prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
  1349. # contain links (just like the HTML output) instead of page references. This
  1350. # makes the output suitable for online browsing using a PDF viewer.
  1351. # The default value is: YES.
  1352. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1353. PDF_HYPERLINKS = YES
  1354. # If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
  1355. # the PDF file directly from the LaTeX files. Set this option to YES, to get a
  1356. # higher quality PDF documentation.
  1357. # The default value is: YES.
  1358. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1359. USE_PDFLATEX = YES
  1360. # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
  1361. # command to the generated LaTeX files. This will instruct LaTeX to keep running
  1362. # if errors occur, instead of asking the user for help. This option is also used
  1363. # when generating formulas in HTML.
  1364. # The default value is: NO.
  1365. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1366. LATEX_BATCHMODE = NO
  1367. # If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
  1368. # index chapters (such as File Index, Compound Index, etc.) in the output.
  1369. # The default value is: NO.
  1370. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1371. LATEX_HIDE_INDICES = NO
  1372. # If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
  1373. # code with syntax highlighting in the LaTeX output.
  1374. #
  1375. # Note that which sources are shown also depends on other settings such as
  1376. # SOURCE_BROWSER.
  1377. # The default value is: NO.
  1378. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1379. LATEX_SOURCE_CODE = NO
  1380. # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
  1381. # bibliography, e.g. plainnat, or ieeetr. See
  1382. # http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
  1383. # The default value is: plain.
  1384. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1385. LATEX_BIB_STYLE = plain
  1386. # If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
  1387. # page will contain the date and time when the page was generated. Setting this
  1388. # to NO can help when comparing the output of multiple runs.
  1389. # The default value is: NO.
  1390. # This tag requires that the tag GENERATE_LATEX is set to YES.
  1391. LATEX_TIMESTAMP = NO
  1392. #---------------------------------------------------------------------------
  1393. # Configuration options related to the RTF output
  1394. #---------------------------------------------------------------------------
  1395. # If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
  1396. # RTF output is optimized for Word 97 and may not look too pretty with other RTF
  1397. # readers/editors.
  1398. # The default value is: NO.
  1399. GENERATE_RTF = NO
  1400. # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
  1401. # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
  1402. # it.
  1403. # The default directory is: rtf.
  1404. # This tag requires that the tag GENERATE_RTF is set to YES.
  1405. RTF_OUTPUT = rtf
  1406. # If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
  1407. # documents. This may be useful for small projects and may help to save some
  1408. # trees in general.
  1409. # The default value is: NO.
  1410. # This tag requires that the tag GENERATE_RTF is set to YES.
  1411. COMPACT_RTF = NO
  1412. # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
  1413. # contain hyperlink fields. The RTF file will contain links (just like the HTML
  1414. # output) instead of page references. This makes the output suitable for online
  1415. # browsing using Word or some other Word compatible readers that support those
  1416. # fields.
  1417. #
  1418. # Note: WordPad (write) and others do not support links.
  1419. # The default value is: NO.
  1420. # This tag requires that the tag GENERATE_RTF is set to YES.
  1421. RTF_HYPERLINKS = NO
  1422. # Load stylesheet definitions from file. Syntax is similar to doxygen's config
  1423. # file, i.e. a series of assignments. You only have to provide replacements,
  1424. # missing definitions are set to their default value.
  1425. #
  1426. # See also section "Doxygen usage" for information on how to generate the
  1427. # default style sheet that doxygen normally uses.
  1428. # This tag requires that the tag GENERATE_RTF is set to YES.
  1429. RTF_STYLESHEET_FILE =
  1430. # Set optional variables used in the generation of an RTF document. Syntax is
  1431. # similar to doxygen's config file. A template extensions file can be generated
  1432. # using doxygen -e rtf extensionFile.
  1433. # This tag requires that the tag GENERATE_RTF is set to YES.
  1434. RTF_EXTENSIONS_FILE =
  1435. # If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
  1436. # with syntax highlighting in the RTF output.
  1437. #
  1438. # Note that which sources are shown also depends on other settings such as
  1439. # SOURCE_BROWSER.
  1440. # The default value is: NO.
  1441. # This tag requires that the tag GENERATE_RTF is set to YES.
  1442. RTF_SOURCE_CODE = NO
  1443. #---------------------------------------------------------------------------
  1444. # Configuration options related to the man page output
  1445. #---------------------------------------------------------------------------
  1446. # If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
  1447. # classes and files.
  1448. # The default value is: NO.
  1449. GENERATE_MAN = NO
  1450. # The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
  1451. # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
  1452. # it. A directory man3 will be created inside the directory specified by
  1453. # MAN_OUTPUT.
  1454. # The default directory is: man.
  1455. # This tag requires that the tag GENERATE_MAN is set to YES.
  1456. MAN_OUTPUT = man
  1457. # The MAN_EXTENSION tag determines the extension that is added to the generated
  1458. # man pages. In case the manual section does not start with a number, the number
  1459. # 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
  1460. # optional.
  1461. # The default value is: .3.
  1462. # This tag requires that the tag GENERATE_MAN is set to YES.
  1463. MAN_EXTENSION = .3
  1464. # The MAN_SUBDIR tag determines the name of the directory created within
  1465. # MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
  1466. # MAN_EXTENSION with the initial . removed.
  1467. # This tag requires that the tag GENERATE_MAN is set to YES.
  1468. MAN_SUBDIR =
  1469. # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
  1470. # will generate one additional man file for each entity documented in the real
  1471. # man page(s). These additional files only source the real man page, but without
  1472. # them the man command would be unable to find the correct page.
  1473. # The default value is: NO.
  1474. # This tag requires that the tag GENERATE_MAN is set to YES.
  1475. MAN_LINKS = NO
  1476. #---------------------------------------------------------------------------
  1477. # Configuration options related to the XML output
  1478. #---------------------------------------------------------------------------
  1479. # If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
  1480. # captures the structure of the code including all documentation.
  1481. # The default value is: NO.
  1482. GENERATE_XML = NO
  1483. # The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
  1484. # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
  1485. # it.
  1486. # The default directory is: xml.
  1487. # This tag requires that the tag GENERATE_XML is set to YES.
  1488. XML_OUTPUT = xml
  1489. # If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
  1490. # listings (including syntax highlighting and cross-referencing information) to
  1491. # the XML output. Note that enabling this will significantly increase the size
  1492. # of the XML output.
  1493. # The default value is: YES.
  1494. # This tag requires that the tag GENERATE_XML is set to YES.
  1495. XML_PROGRAMLISTING = YES
  1496. #---------------------------------------------------------------------------
  1497. # Configuration options related to the DOCBOOK output
  1498. #---------------------------------------------------------------------------
  1499. # If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
  1500. # that can be used to generate PDF.
  1501. # The default value is: NO.
  1502. GENERATE_DOCBOOK = NO
  1503. # The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
  1504. # If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
  1505. # front of it.
  1506. # The default directory is: docbook.
  1507. # This tag requires that the tag GENERATE_DOCBOOK is set to YES.
  1508. DOCBOOK_OUTPUT = docbook
  1509. # If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
  1510. # program listings (including syntax highlighting and cross-referencing
  1511. # information) to the DOCBOOK output. Note that enabling this will significantly
  1512. # increase the size of the DOCBOOK output.
  1513. # The default value is: NO.
  1514. # This tag requires that the tag GENERATE_DOCBOOK is set to YES.
  1515. DOCBOOK_PROGRAMLISTING = NO
  1516. #---------------------------------------------------------------------------
  1517. # Configuration options for the AutoGen Definitions output
  1518. #---------------------------------------------------------------------------
  1519. # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
  1520. # AutoGen Definitions (see http://autogen.sf.net) file that captures the
  1521. # structure of the code including all documentation. Note that this feature is
  1522. # still experimental and incomplete at the moment.
  1523. # The default value is: NO.
  1524. GENERATE_AUTOGEN_DEF = NO
  1525. #---------------------------------------------------------------------------
  1526. # Configuration options related to the Perl module output
  1527. #---------------------------------------------------------------------------
  1528. # If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
  1529. # file that captures the structure of the code including all documentation.
  1530. #
  1531. # Note that this feature is still experimental and incomplete at the moment.
  1532. # The default value is: NO.
  1533. GENERATE_PERLMOD = NO
  1534. # If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
  1535. # Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
  1536. # output from the Perl module output.
  1537. # The default value is: NO.
  1538. # This tag requires that the tag GENERATE_PERLMOD is set to YES.
  1539. PERLMOD_LATEX = NO
  1540. # If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
  1541. # formatted so it can be parsed by a human reader. This is useful if you want to
  1542. # understand what is going on. On the other hand, if this tag is set to NO, the
  1543. # size of the Perl module output will be much smaller and Perl will parse it
  1544. # just the same.
  1545. # The default value is: YES.
  1546. # This tag requires that the tag GENERATE_PERLMOD is set to YES.
  1547. PERLMOD_PRETTY = YES
  1548. # The names of the make variables in the generated doxyrules.make file are
  1549. # prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
  1550. # so different doxyrules.make files included by the same Makefile don't
  1551. # overwrite each other's variables.
  1552. # This tag requires that the tag GENERATE_PERLMOD is set to YES.
  1553. PERLMOD_MAKEVAR_PREFIX =
  1554. #---------------------------------------------------------------------------
  1555. # Configuration options related to the preprocessor
  1556. #---------------------------------------------------------------------------
  1557. # If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
  1558. # C-preprocessor directives found in the sources and include files.
  1559. # The default value is: YES.
  1560. ENABLE_PREPROCESSING = YES
  1561. # If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
  1562. # in the source code. If set to NO, only conditional compilation will be
  1563. # performed. Macro expansion can be done in a controlled way by setting
  1564. # EXPAND_ONLY_PREDEF to YES.
  1565. # The default value is: NO.
  1566. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
  1567. MACRO_EXPANSION = NO
  1568. # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
  1569. # the macro expansion is limited to the macros specified with the PREDEFINED and
  1570. # EXPAND_AS_DEFINED tags.
  1571. # The default value is: NO.
  1572. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
  1573. EXPAND_ONLY_PREDEF = NO
  1574. # If the SEARCH_INCLUDES tag is set to YES, the include files in the
  1575. # INCLUDE_PATH will be searched if a #include is found.
  1576. # The default value is: YES.
  1577. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
  1578. SEARCH_INCLUDES = YES
  1579. # The INCLUDE_PATH tag can be used to specify one or more directories that
  1580. # contain include files that are not input files but should be processed by the
  1581. # preprocessor.
  1582. # This tag requires that the tag SEARCH_INCLUDES is set to YES.
  1583. INCLUDE_PATH =
  1584. # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
  1585. # patterns (like *.h and *.hpp) to filter out the header-files in the
  1586. # directories. If left blank, the patterns specified with FILE_PATTERNS will be
  1587. # used.
  1588. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
  1589. INCLUDE_FILE_PATTERNS =
  1590. # The PREDEFINED tag can be used to specify one or more macro names that are
  1591. # defined before the preprocessor is started (similar to the -D option of e.g.
  1592. # gcc). The argument of the tag is a list of macros of the form: name or
  1593. # name=definition (no spaces). If the definition and the "=" are omitted, "=1"
  1594. # is assumed. To prevent a macro definition from being undefined via #undef or
  1595. # recursively expanded use the := operator instead of the = operator.
  1596. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
  1597. PREDEFINED =
  1598. # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
  1599. # tag can be used to specify a list of macro names that should be expanded. The
  1600. # macro definition that is found in the sources will be used. Use the PREDEFINED
  1601. # tag if you want to use a different macro definition that overrules the
  1602. # definition found in the source code.
  1603. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
  1604. EXPAND_AS_DEFINED =
  1605. # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
  1606. # remove all references to function-like macros that are alone on a line, have
  1607. # an all uppercase name, and do not end with a semicolon. Such function macros
  1608. # are typically used for boiler-plate code, and will confuse the parser if not
  1609. # removed.
  1610. # The default value is: YES.
  1611. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
  1612. SKIP_FUNCTION_MACROS = YES
  1613. #---------------------------------------------------------------------------
  1614. # Configuration options related to external references
  1615. #---------------------------------------------------------------------------
  1616. # The TAGFILES tag can be used to specify one or more tag files. For each tag
  1617. # file the location of the external documentation should be added. The format of
  1618. # a tag file without this location is as follows:
  1619. # TAGFILES = file1 file2 ...
  1620. # Adding location for the tag files is done as follows:
  1621. # TAGFILES = file1=loc1 "file2 = loc2" ...
  1622. # where loc1 and loc2 can be relative or absolute paths or URLs. See the
  1623. # section "Linking to external documentation" for more information about the use
  1624. # of tag files.
  1625. # Note: Each tag file must have a unique name (where the name does NOT include
  1626. # the path). If a tag file is not located in the directory in which doxygen is
  1627. # run, you must also specify the path to the tagfile here.
  1628. TAGFILES =
  1629. # When a file name is specified after GENERATE_TAGFILE, doxygen will create a
  1630. # tag file that is based on the input files it reads. See section "Linking to
  1631. # external documentation" for more information about the usage of tag files.
  1632. GENERATE_TAGFILE =
  1633. # If the ALLEXTERNALS tag is set to YES, all external class will be listed in
  1634. # the class index. If set to NO, only the inherited external classes will be
  1635. # listed.
  1636. # The default value is: NO.
  1637. ALLEXTERNALS = NO
  1638. # If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
  1639. # in the modules index. If set to NO, only the current project's groups will be
  1640. # listed.
  1641. # The default value is: YES.
  1642. EXTERNAL_GROUPS = YES
  1643. # If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
  1644. # the related pages index. If set to NO, only the current project's pages will
  1645. # be listed.
  1646. # The default value is: YES.
  1647. EXTERNAL_PAGES = YES
  1648. # The PERL_PATH should be the absolute path and name of the perl script
  1649. # interpreter (i.e. the result of 'which perl').
  1650. # The default file (with absolute path) is: /usr/bin/perl.
  1651. PERL_PATH = /usr/bin/perl
  1652. #---------------------------------------------------------------------------
  1653. # Configuration options related to the dot tool
  1654. #---------------------------------------------------------------------------
  1655. # If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
  1656. # (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
  1657. # NO turns the diagrams off. Note that this option also works with HAVE_DOT
  1658. # disabled, but it is recommended to install and use dot, since it yields more
  1659. # powerful graphs.
  1660. # The default value is: YES.
  1661. CLASS_DIAGRAMS = YES
  1662. # You can define message sequence charts within doxygen comments using the \msc
  1663. # command. Doxygen will then run the mscgen tool (see:
  1664. # http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
  1665. # documentation. The MSCGEN_PATH tag allows you to specify the directory where
  1666. # the mscgen tool resides. If left empty the tool is assumed to be found in the
  1667. # default search path.
  1668. MSCGEN_PATH =
  1669. # You can include diagrams made with dia in doxygen documentation. Doxygen will
  1670. # then run dia to produce the diagram and insert it in the documentation. The
  1671. # DIA_PATH tag allows you to specify the directory where the dia binary resides.
  1672. # If left empty dia is assumed to be found in the default search path.
  1673. DIA_PATH =
  1674. # If set to YES the inheritance and collaboration graphs will hide inheritance
  1675. # and usage relations if the target is undocumented or is not a class.
  1676. # The default value is: YES.
  1677. HIDE_UNDOC_RELATIONS = YES
  1678. # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
  1679. # available from the path. This tool is part of Graphviz (see:
  1680. # http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
  1681. # Bell Labs. The other options in this section have no effect if this option is
  1682. # set to NO
  1683. # The default value is: YES.
  1684. HAVE_DOT = YES
  1685. # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
  1686. # to run in parallel. When set to 0 doxygen will base this on the number of
  1687. # processors available in the system. You can set it explicitly to a value
  1688. # larger than 0 to get control over the balance between CPU load and processing
  1689. # speed.
  1690. # Minimum value: 0, maximum value: 32, default value: 0.
  1691. # This tag requires that the tag HAVE_DOT is set to YES.
  1692. DOT_NUM_THREADS = 0
  1693. # When you want a differently looking font in the dot files that doxygen
  1694. # generates you can specify the font name using DOT_FONTNAME. You need to make
  1695. # sure dot is able to find the font, which can be done by putting it in a
  1696. # standard location or by setting the DOTFONTPATH environment variable or by
  1697. # setting DOT_FONTPATH to the directory containing the font.
  1698. # The default value is: Helvetica.
  1699. # This tag requires that the tag HAVE_DOT is set to YES.
  1700. DOT_FONTNAME = Helvetica
  1701. # The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
  1702. # dot graphs.
  1703. # Minimum value: 4, maximum value: 24, default value: 10.
  1704. # This tag requires that the tag HAVE_DOT is set to YES.
  1705. DOT_FONTSIZE = 10
  1706. # By default doxygen will tell dot to use the default font as specified with
  1707. # DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
  1708. # the path where dot can find it using this tag.
  1709. # This tag requires that the tag HAVE_DOT is set to YES.
  1710. DOT_FONTPATH =
  1711. # If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
  1712. # each documented class showing the direct and indirect inheritance relations.
  1713. # Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
  1714. # The default value is: YES.
  1715. # This tag requires that the tag HAVE_DOT is set to YES.
  1716. CLASS_GRAPH = YES
  1717. # If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
  1718. # graph for each documented class showing the direct and indirect implementation
  1719. # dependencies (inheritance, containment, and class references variables) of the
  1720. # class with other documented classes.
  1721. # The default value is: YES.
  1722. # This tag requires that the tag HAVE_DOT is set to YES.
  1723. COLLABORATION_GRAPH = YES
  1724. # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
  1725. # groups, showing the direct groups dependencies.
  1726. # The default value is: YES.
  1727. # This tag requires that the tag HAVE_DOT is set to YES.
  1728. GROUP_GRAPHS = YES
  1729. # If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
  1730. # collaboration diagrams in a style similar to the OMG's Unified Modeling
  1731. # Language.
  1732. # The default value is: NO.
  1733. # This tag requires that the tag HAVE_DOT is set to YES.
  1734. UML_LOOK = NO
  1735. # If the UML_LOOK tag is enabled, the fields and methods are shown inside the
  1736. # class node. If there are many fields or methods and many nodes the graph may
  1737. # become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
  1738. # number of items for each type to make the size more manageable. Set this to 0
  1739. # for no limit. Note that the threshold may be exceeded by 50% before the limit
  1740. # is enforced. So when you set the threshold to 10, up to 15 fields may appear,
  1741. # but if the number exceeds 15, the total amount of fields shown is limited to
  1742. # 10.
  1743. # Minimum value: 0, maximum value: 100, default value: 10.
  1744. # This tag requires that the tag HAVE_DOT is set to YES.
  1745. UML_LIMIT_NUM_FIELDS = 10
  1746. # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
  1747. # collaboration graphs will show the relations between templates and their
  1748. # instances.
  1749. # The default value is: NO.
  1750. # This tag requires that the tag HAVE_DOT is set to YES.
  1751. TEMPLATE_RELATIONS = NO
  1752. # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
  1753. # YES then doxygen will generate a graph for each documented file showing the
  1754. # direct and indirect include dependencies of the file with other documented
  1755. # files.
  1756. # The default value is: YES.
  1757. # This tag requires that the tag HAVE_DOT is set to YES.
  1758. INCLUDE_GRAPH = YES
  1759. # If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
  1760. # set to YES then doxygen will generate a graph for each documented file showing
  1761. # the direct and indirect include dependencies of the file with other documented
  1762. # files.
  1763. # The default value is: YES.
  1764. # This tag requires that the tag HAVE_DOT is set to YES.
  1765. INCLUDED_BY_GRAPH = YES
  1766. # If the CALL_GRAPH tag is set to YES then doxygen will generate a call
  1767. # dependency graph for every global function or class method.
  1768. #
  1769. # Note that enabling this option will significantly increase the time of a run.
  1770. # So in most cases it will be better to enable call graphs for selected
  1771. # functions only using the \callgraph command. Disabling a call graph can be
  1772. # accomplished by means of the command \hidecallgraph.
  1773. # The default value is: NO.
  1774. # This tag requires that the tag HAVE_DOT is set to YES.
  1775. CALL_GRAPH = NO
  1776. # If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
  1777. # dependency graph for every global function or class method.
  1778. #
  1779. # Note that enabling this option will significantly increase the time of a run.
  1780. # So in most cases it will be better to enable caller graphs for selected
  1781. # functions only using the \callergraph command. Disabling a caller graph can be
  1782. # accomplished by means of the command \hidecallergraph.
  1783. # The default value is: NO.
  1784. # This tag requires that the tag HAVE_DOT is set to YES.
  1785. CALLER_GRAPH = NO
  1786. # If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
  1787. # hierarchy of all classes instead of a textual one.
  1788. # The default value is: YES.
  1789. # This tag requires that the tag HAVE_DOT is set to YES.
  1790. GRAPHICAL_HIERARCHY = YES
  1791. # If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
  1792. # dependencies a directory has on other directories in a graphical way. The
  1793. # dependency relations are determined by the #include relations between the
  1794. # files in the directories.
  1795. # The default value is: YES.
  1796. # This tag requires that the tag HAVE_DOT is set to YES.
  1797. DIRECTORY_GRAPH = YES
  1798. # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
  1799. # generated by dot. For an explanation of the image formats see the section
  1800. # output formats in the documentation of the dot tool (Graphviz (see:
  1801. # http://www.graphviz.org/)).
  1802. # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
  1803. # to make the SVG files visible in IE 9+ (other browsers do not have this
  1804. # requirement).
  1805. # Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd,
  1806. # png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo,
  1807. # gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, png:cairo,
  1808. # png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
  1809. # png:gdiplus:gdiplus.
  1810. # The default value is: png.
  1811. # This tag requires that the tag HAVE_DOT is set to YES.
  1812. DOT_IMAGE_FORMAT = png
  1813. # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
  1814. # enable generation of interactive SVG images that allow zooming and panning.
  1815. #
  1816. # Note that this requires a modern browser other than Internet Explorer. Tested
  1817. # and working are Firefox, Chrome, Safari, and Opera.
  1818. # Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
  1819. # the SVG files visible. Older versions of IE do not have SVG support.
  1820. # The default value is: NO.
  1821. # This tag requires that the tag HAVE_DOT is set to YES.
  1822. INTERACTIVE_SVG = NO
  1823. # The DOT_PATH tag can be used to specify the path where the dot tool can be
  1824. # found. If left blank, it is assumed the dot tool can be found in the path.
  1825. # This tag requires that the tag HAVE_DOT is set to YES.
  1826. DOT_PATH =
  1827. # The DOTFILE_DIRS tag can be used to specify one or more directories that
  1828. # contain dot files that are included in the documentation (see the \dotfile
  1829. # command).
  1830. # This tag requires that the tag HAVE_DOT is set to YES.
  1831. DOTFILE_DIRS =
  1832. # The MSCFILE_DIRS tag can be used to specify one or more directories that
  1833. # contain msc files that are included in the documentation (see the \mscfile
  1834. # command).
  1835. MSCFILE_DIRS =
  1836. # The DIAFILE_DIRS tag can be used to specify one or more directories that
  1837. # contain dia files that are included in the documentation (see the \diafile
  1838. # command).
  1839. DIAFILE_DIRS =
  1840. # When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
  1841. # path where java can find the plantuml.jar file. If left blank, it is assumed
  1842. # PlantUML is not used or called during a preprocessing step. Doxygen will
  1843. # generate a warning when it encounters a \startuml command in this case and
  1844. # will not generate output for the diagram.
  1845. PLANTUML_JAR_PATH =
  1846. # When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a
  1847. # configuration file for plantuml.
  1848. PLANTUML_CFG_FILE =
  1849. # When using plantuml, the specified paths are searched for files specified by
  1850. # the !include statement in a plantuml block.
  1851. PLANTUML_INCLUDE_PATH =
  1852. # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
  1853. # that will be shown in the graph. If the number of nodes in a graph becomes
  1854. # larger than this value, doxygen will truncate the graph, which is visualized
  1855. # by representing a node as a red box. Note that doxygen if the number of direct
  1856. # children of the root node in a graph is already larger than
  1857. # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
  1858. # the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
  1859. # Minimum value: 0, maximum value: 10000, default value: 50.
  1860. # This tag requires that the tag HAVE_DOT is set to YES.
  1861. DOT_GRAPH_MAX_NODES = 50
  1862. # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
  1863. # generated by dot. A depth value of 3 means that only nodes reachable from the
  1864. # root by following a path via at most 3 edges will be shown. Nodes that lay
  1865. # further from the root node will be omitted. Note that setting this option to 1
  1866. # or 2 may greatly reduce the computation time needed for large code bases. Also
  1867. # note that the size of a graph can be further restricted by
  1868. # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
  1869. # Minimum value: 0, maximum value: 1000, default value: 0.
  1870. # This tag requires that the tag HAVE_DOT is set to YES.
  1871. MAX_DOT_GRAPH_DEPTH = 0
  1872. # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
  1873. # background. This is disabled by default, because dot on Windows does not seem
  1874. # to support this out of the box.
  1875. #
  1876. # Warning: Depending on the platform used, enabling this option may lead to
  1877. # badly anti-aliased labels on the edges of a graph (i.e. they become hard to
  1878. # read).
  1879. # The default value is: NO.
  1880. # This tag requires that the tag HAVE_DOT is set to YES.
  1881. DOT_TRANSPARENT = NO
  1882. # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
  1883. # files in one run (i.e. multiple -o and -T options on the command line). This
  1884. # makes dot run faster, but since only newer versions of dot (>1.8.10) support
  1885. # this, this feature is disabled by default.
  1886. # The default value is: NO.
  1887. # This tag requires that the tag HAVE_DOT is set to YES.
  1888. DOT_MULTI_TARGETS = NO
  1889. # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
  1890. # explaining the meaning of the various boxes and arrows in the dot generated
  1891. # graphs.
  1892. # The default value is: YES.
  1893. # This tag requires that the tag HAVE_DOT is set to YES.
  1894. GENERATE_LEGEND = YES
  1895. # If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
  1896. # files that are used to generate the various graphs.
  1897. # The default value is: YES.
  1898. # This tag requires that the tag HAVE_DOT is set to YES.
  1899. DOT_CLEANUP = YES
Social stuff:
Mastodon